Anatomical Properties and Quality of African Wood Fiber as A Raw Material for Pulp and Paper
Sifat Anatomi dan Kualitas Serat Kayu Afrika sebagai Bahan Baku Pulp dan Kertas
DOI:
https://doi.org/10.24259/perennial.v19i2.31192Keywords:
Afrika wood, Anatomical properties, Fiber quality, Pulp and paperAbstract
Nowdays, there is growing interested in development of afrika wood utilization. Afrika wood is one fast growing species from plantation forest. The objective of this research was to evaluated of characterization of afrika fiber for pulp and paper production. Anatomical properties of afrika wood were also investigated. Determination of characterization of fiber dimension was conducted based on Tappi (1989). The resulted showed that afrika wood have type of porous namely soliter and radial multiple porous. The parenchyma and ray characters were paratracheal parenchyma confluent and multiseriate types. For fiber characteristic obtained by fiber length, fiber diameter, lumen diameter, and cell wall thickness were 935.33 µm, 28.52 µm, 21.29 µm, and 3.62 µm respectively. The derived value of afrika fibers obtained by runkel ratio, felting power, muhlsteph ratio, coefficient of rigidity, flexibility ratio, and fiber length were 0.43, 35.02, 20.51, 0.12, 0.76, and 935.33 µm respectively. Based on the derived value of afrika fibers, it qualifies as Grade II material for pulp and paper production. Afrika wood can be used as raw material for pulp and paper production.Downloads
References
Akgul, M., and Tozluoglu, A. 2009. Some Chemical and Morphological Properties of Juvenile Woods from Beech (Fagus orientalis L.) and Pine (Pinus nigra A.) Plantations. Trends in Applied Sciences Research Academic Journals Inc. 4(2): 116–125.
Aprianis, Y., and Rahmayanti, S. 2008. Dimensi Serat dan Nilai Turunannya dari Tujuh Jenis Kayu Asal Propinsi Jambi.
Ashori, A., and Nourbakhsh, A. 2009. Im Iran angebaute Paulownie als möglicher Faserrohstoff für die Papierindustrie. European Journal of Wood and Wood Products 67(3): 323–327. DOI: 10.1007/s00107-009-0326-0
Augustina, S., Wahyudi, I., Darmawan, I. W., and Malik, J. 2020. Ciri Anatomi, Morfologi Serat, dan Sifat Fisis Tiga Jenis Lesser-Used Wood Species Asal Kalimantan Utara, Indonesia. Jurnal Ilmu Pertanian Indonesia 25(4): 599–609. DOI: 10.18343/jipi.25.4.599
Baskara, M. I. A., Hapsoro, D., Maulana, M. I., Marwanto, Prasetia, D., Hidayat, W., Lubis, M. A. R., Febrianto, F., and Kim, N. H. 2022. Physical and Mechanical Properties of Oriented Strand Board from Three Species of Plantation Forests at Various Resin Contents. Jurnal Sylva Lestari 10(1): 49–62. DOI: 10.23960/jsl.v10i1.519
Febrianto, F., Pranata, A. Z., and Gumilang, A. 2013. Keawetan Alami Sembilan Jenis Kayu dari Kampus Dramaga Institut Pertanian Bogor terhadap Serangan Rayap ( Natural Durability of Nine Woods Species Grown in Dramaga Campus Bogor Agricultural University against Termite Attacked ). 19–28.
Haygreen, J. ., and Bowyer, J. . 1989. Hasil Hutan dan Ilmu Kayu: Suatu Pengantar. Gadjah Mada University Press.
Herlina, Istikowati, W. T., and Fatriani. 2018. Analisis Kimia Dan Serat Pandan Rasau ( Pandanus Helicopus ) Sebagai Alternatif Bahan Baku Pulp Kertas. Jurnal Sylva Scienteae 01(2): 150–159.
Karlinasari, L., Fredisa, Y., Adzkia, U., Fauziyyah, S., Dwiyanti, F. G., and Siregar, I. Z. 2012. Use of a Pin-penetration Wood Density Meter to Determine the Density of 25 Indonesian Species.
Kementerian Perindustrian Republik Indonesia. 2021. Mungkinkah Peran Industri Bersandar pada Industri Pulp dan Paper ? IV: 39.
Khoiriyyah, M., Nuryatin, N., and ... 2022. Dimensi Pori dan Serat Dalam Antar Lingkaran Tumbuh Kayu Surian (Toona sureni). Journal of Global Forest … 2(1): 61–68.
Lempang, M. 2016. Sifat dasar dan potensi kegunaan kayu saling-saling. Jurnal Penelitian Kehutanan Wallacea 5(1): 79–90.
Lestari, D., Ningsih, R. V., Fahrussiam, F., and Mustamu, S. 2023. Fortification of Bioadhesive with Phenol Formaldehyde: Caracteristics and its Application for Afrika Laminated Wood. Jurnal Biologi Tropis 23(2): 257–262. DOI: 10.29303/jbt.v23i2.4857
Main, N. M., Talib, R. A., Ibrahim, R., Rahman, R. A., and Mohamed, A. Z. 2014. Suitability of Coir Fibers as Pulp and Paper. Agriculture and Agricultural Science Procedia Elsevier Srl 2: 304–311. DOI: 10.1016/j.aaspro.2014.11.043
Mulyanie. 2018. Pohon Aren Sebagai Tanaman Fungsi Konservasi. Jurnal Geografi 14(2): 11–17.
Munawaroh, S. 2010. Deteksi Growthring Pada Kayu Dengan Metode Edge Linking. Jurnal Dinamika Informatika 2(2).
San, H. P., Long, L. K., Zhang, C. Z., Hui, T. C., Seng, W. Y., Lin, F. S., Hun, A. T., and Fong, W. K. 2016. Anatomical Features, Fiber Morphological, Physical and Mechanical Properties of Three Years Old New Hybrid Paulownia: Green Paulownia. Research Journal of Forestry Science Alert 10(1): 30–35. DOI: 10.3923/rjf.2016.30.35
Syafii, W., and Siregar, I. Z. 2006. Sifat Kimia dan Dimensi Serat Kayu Mangium (Acacia mangium Willd .) from Three Provenances. Journal Tropical Wood Science & Technology 4(1): 28–32.
TAPPI. 1989. Tappi Test Methods. Volume One. Tappi, Atlanta.
Tutuş, A., Kazaskeroğlu, Y., and çiçekler, M. 2015. Evaluation of tea wastes in usage pulp and paper production. BioResources 10(3): 5395–5406. DOI: 10.15376/biores.10.3.5395-5406
Wiedenhoeft, A. C. 2012. Structure and function of wood. Handbook of Wood Chemistry and Wood Composites, Second Edition 9–32. DOI: 10.1201/b12487
Xu, F., Zhong, X. C., Sun, R. C., and Lu, Q. 2006. Anatomy, ultrastructure and lignin distribution in cell wall of Caragana Korshinskii. Industrial Crops and Products 24(2): 186–193. DOI: 10.1016/j.indcrop.2006.04.002
