Pengujian Sistem Steering Gear Pada Saat Sea Trial Kapal Perintis Sabuk Nusantara 750 DWT

Adi Kurniawan Yusim; Iwan Iwan; Bambang Sri Waluyo

doi:10.62012/zl.v2i3.18402

Authors

Adi Kurniawan Yusim Universitas Diponegoro
Iwan Iwan Universitas Diponegoro
Bambang Sri Waluyo Universitas Diponegoro

DOI:

https://doi.org/10.62012/zl.v2i3.18402

Keywords:

Steering Gear, Sea Trial, Pioneer Ship.

Abstract

In the sea trial, many things were tested, one of which was the steering gear test. This test aims to determine the time it takes the ship to turn at a certain angle according to the provisions of the Biro Klasifikasi Indonesia (BKI) and check the function of the steering system. On the Sabuk Nusantara 750 DWT Pioneer Ship carried out two types of tests, namely the main steering gear and the auxiliary steering test. The main steering gear test is carried out in a series of tests with a joystick on the steering gear panel on the ship's bridge. Auxiliary steering test is divided into two types, namely using the steering wheel and solenoid which is located in the engine room. Testing the steering gear on this archipelago belt pioneer ship meets the requirements of BKI.

Downloads

Download data is not yet available.

References

Sarifuddin, Mantoro, B., Amrullah, R.A, Saputra, I.D, "Kebocoran pada pompa hidrolik steering gear dengan satu rudder di kapal MT.Pelita Energi", Prosiding Seminar Bidang Teknika Pelayaran, Volume 6, p. 01 – 08, 2017.

Molland, Anthony F., 2007, The Maritime Engineering Reference Book: A Guide to Ship Design, Construction and Operation 1st Edition, UK: Butterworth-Heinemann.

Amiruddin, W., Hadi, E. S., Kiryanto, "Pemanfaatan Material Plastik Hdpe Bekas Drum Kemasan Sebagai Kulit Lambung Perahu", KAPAL: Jurnal Teknik Perkapalan, vol. 11, no. 03, p. 162 – 167, 2014.

BKI Rule, 2019, Guidance for Sea Trials of Motor Vessels (Vol B). [Accessed 01 April 2020].

Sugiyono, 2009, Metode Kuantitatif Kualitatif dan R&D, Bandung: Alfabeta.