Job Safety Analysis Dalam Identifikasi Potensi Bahaya Sebagai Upaya Pencegahan Kecelakaan Kerja Pada Pekerjaan Replating Dan Coating Kapal Di Pt. Dok Dan Perkapalan Surabaya (Persero)

Fachrul Juniarianto; Dwisetiono Dwisetiono

doi:10.62012/zl.v3i2.15955

Authors

Fachrul Juniarianto Universitas Hang Tuah Surabaya
Dwisetiono Dwisetiono Universitas HangTuah

DOI:

https://doi.org/10.62012/zl.v3i2.15955

Keywords:

Job Safety Analysis, JSA, Occupational safety and health, Work accidents, K3

Abstract

The use of modern machinery and installations and hazardous materials is increasing. In addition, a work environment that does not meet the requirements for occupational safety and health, hazardous work processes and nature, as well as an increase in the intensity of the operational work of the workforce, affects the increase in the number and seriousness of work accidents. The type of research used is descriptive quantitative research so that the data entered are in the form of words, sentences and pictures, which are then scored to determine the level of danger before carrying out the work. In conducting a job safety analysis, what is done is to determine the work to be analyzed, divide the work into several work steps or standard operating procedures, identify potential hazards, risk assessment, evaluate risk and determine the level of risk and prevention. The assessment of the risk value analysis on replating work has a value of up to 8, indicating the need for control measures in the process. Then the coating work on the fuel area and main deck also have a risk value of 8, so it is also necessary to take control measures on the coating process in that area.

Downloads

Download data is not yet available.

References

Abduh, M., Sahputra, R. J. and Boris, B. (2010) ‘Pengelolaan faktor non-personil untuk pencegahan kecelakaan kerja konstruksi’, Konferensi Nasional Teknik Sipil 4 (Konteks 4), 4(KoNTekS 4), pp. 255–262. Available at: http://ftsl.itb.ac.id/kk/manajemen_dan_rekayasa_konstruksi/wp-content/uploads/2010/10/konteks-4-ma2.pdf.

Cooper, D. F. (2007) ‘Tutorial Notes on the Australian and New Zealand Standard on Risk Management, AS/NZS 4360:2004’, Broadleaf capital international, pp. 1–6.

Djajaningrat, H. and Praptono, R. (2009) Sistem Manajemen Keselamatan dan Kesehatan Kerja OHSAS 18001. ke 1. Edited by M. K. R. P. Husjain Djajaningrat, AMAK, SKM. Jakarta: Dian Rakyat.

Mahendar, F. and Pujutomo, D. (2014) ‘Identifikasi Bahaya, Pengendalian Resiko Dan Keselamatan Kerja Pada Bagian Bengkel Repair Galangan Kapal Dengan Menggunakan Metode Job Safety Analysis (Jsa) Di Pt Janata Marina Indah, Semarang’, Industrial Engineering Online Journal, 3(2). Available at: https://ejournal3.undip.ac.id/index.php/ieoj/article/view/6307.

Michaud, P. A. and Michaud, P. A. (2018) ‘Job Hazard Analysis’, Accident Prevention and Osha Compliance, 2002, pp. 25–29. doi: 10.1201/9781315136578-6.

Rizka Pisceliya, D. M. and Mindayani, S. (2018) ‘Analisis Kecelakaan Kerja Pada Pekerja Pengelasan Di Cv. Cahaya Tiga Putri’, Jurnal Riset Hesti Medan Akper Kesdam I/BB Medan, 3(1), p. 66. doi: 10.34008/jurhesti.v3i1.25.

Soehatman Ramli (2013) ‘Pedoman Praktis Manajemen Risiko dalam Perspektif K3 OHS Risk Management’, Pedoman Praktis Manajemen Risiko dalam Perspektif K3 OHS Risk Management.

Suyono, K. Z., and Nawawinetu, E. D. (2013) ‘Work Safety with Safety Behavior at PT DOK and shipping in Surabaya Unit Hull Construction’, Thee Indonesian Journal of Occupation Safety and Health, 2, pp. 67–74.