Analisa Cacat Pengelasan Dengan Menggunakan Teknik Pengelasan Down Hand Pada Pelat Lambung (Hull) Kapal

Sugeng Marsudi

doi:10.62012/zl.v2i1.13572

Authors

Sugeng Marsudi Program Diploma Pelayaran Universitas Hang Tuah Surabaya

DOI:

https://doi.org/10.62012/zl.v2i1.13572

Keywords:

Welding, Welding Technique, Ship Hull

Abstract

Shipbuilding nearly 2/3 of the work is welding work. There are several variations of the weld joint as an option based on the thickness and quality of the material, the method of welding. Welding results generally depend heavily on the skill of the welder. Weld damage both on the surface and on the inside is difficult to detect with a simple test method. In addition, because the structure being welded is an integral part of the entire body of the weld material, the cracks that arise will spread quickly and may even cause serious accidents. In general, welding on ships has requirements from the Classification Agency which supervises and provides the feasibility of the ship's construction strength. To meet these requirements, the role of the welder and technique is very large, so that the ship gets good welding quality and can be accepted by the shipowner and the classification agency.

Downloads

Download data is not yet available.

References

E. S. Hadi, “Analisa Pengelasan Mild Steel (St.42) Dengan Proses Smaw, Fcaw Dan Saw Ditinjau Dari Segi Kekuatan Dan Nilai Ekonomis,” Kapal, vol. 6, no. 2, pp. 107–117, 2012.

S. Wilastari, “Pentingnya Badan Klasifikasi Kapal Dalam Industri Maritim,” Din. Bahari, vol. 1, no. 1, pp. 27–30, 2020.

J. T. Perkapalan, “Analisis Variasi Sudut Kampuh Single V-Butt Joint Las Mig pada,” vol. 9, no. 1, pp. 1–10, 2021.

B. A. B. Ii, “PENDEKATAN PEMECAHAN MASALAH A . Grand Livina B . Engine Stand,” pp. 6–33.

A. Bakhori, “Perbaikan Metode Pengelasan Smaw ( Shield Metal Arc Welding ) Pada Industri Kecil Di Kota Medan,” Perbaikan Metod. Pengelasan Smaw ( Shield Met. Arc Weld. ) Pada Ind. Kecil Di Kota Medan, vol. 13, no. 1, pp. 14–21, 2017.

Syahnanda Hidayatullah, “Pejuang Mesin Scooter: Pengujian Dan Pemeriksaan Hasil Las,” 2010. [Online]. Available: http://santrinekatgmail.blogspot.com/2010/05/pengujian-dan-pemeriksaan-hasil-las.html.