Pengaruh Viskositas Cat Terhadap Sifat Keterbasahan Kayu Rajumas (Duabanga moluccana Blume): The Effect of Paint Viscosity on The Wettabillity of Rajumas Wood (Duabanga moluccana Blume)

Zsarytha Maulia; Hairil Anwar; Andi Tri Lestari

doi:10.24259/perennial.v19i2.31323

Authors

Zsarytha Maulia University of Mataram
Hairil Anwar
Andi Tri Lestari

DOI:

https://doi.org/10.24259/perennial.v19i2.31323

Keywords:

Contact angle, paint viscosity, rajumas wood, sessile drop, wettability

Abstract

Rajumas wood is one of the local wood forest products from West Nusa Tenggara and has low strength and durability. Finishing treatment is needed for the service life of wood. One of the indicators of finishing quality is the ability of paint liquid wetting on the wood surface (wettability). This research aims to analyze the effect of paint viscosity on the wettability of rajumas wood. The samples used were radial and tangential sections in air-dry condition, and the wood surfaces were sanded with abrasive paper of 150 grit. The value of viscosities was 2.44, 2.41, and 2.32 poise from each percentage of paint and water ratio of 90%:10%, 80%:20%, and 70%:30%. Wettability was determined based on the rate of change equilibrium contact angle using the S/G equation. The research results show that the low viscosity value of Aqua Politur produces the lowest equilibrium value and highest wettability value (K-Value) in both radial and tangential sections. A high K-value indicates that Aqua Politur's ability to wet the wood surface is better, as shown by the paint percentage ratio of 70%:30%.

Downloads

Download data is not yet available.

References

Alamsyah, E.M., Nan, L.C., Yamada, M., Taki, K., & Yoshida, H. (2007). Bondability of Tropical Fast-Growing Tree Species I: Indonesian Wood Species. J. Wood Science, 53: 40-46.

Albaraw, Z. (2018). Katalog Tanaman HHBK dan HHK dari Rehabilitasi DAS Sakuli, Unit HKm Santong, dan HKm Sambelia. IPB Press. Bogor.

Amorim, M.R.S., Riberio, P.G., Martins, S.A., Del Menezzi, C.H.S., & Souza, M.R. (2013). Surface Wettability and Roughness of 11 Amazonian Tropical Hardwoods. Floresta e Ambiente, 20(1): 99-109.

Anoop, E.V., & Pasha, M.K.S. (2017). Timber Identification Manual: Manual of Timbers Used by Wood Based Handicrafts Industry of Kerala, Uttar Pradesh and Rajasthan. Europian Union/WWF India. New Delhi.

Ayrilmis, N., Candan, Z., Akbulut, T., & Balkiz, O.D. (2010). Effect of Sanding on Surface Properties of Medium Density Fiberboard. Drvna Industrija, 61(3): 175-181.

Bonita, M.K. 2015. Efektifitas Exstrak Biji Mimba (Azadirachta indica A Juss) Terhadap Ketahanan Kayu Rajumas (Duabanga moluccana) dari Serangan Rayap Tanah (Nacutitermes spp). Jurnal Sangkareang, 1(1): 7-14.

BPDAS Barito. (2020). Rajumas – Nusa Tenggara Barat. https://bpdasbarito.or.id/rajumas-nusa-tenggara-barat/. [21 Februari 2023]

Fawzi, N.F. (2016). Pengaruh Kekasaran Permukaan Terhadap Keterbasahan dan Daya Lekat Bahan Finishing pada Kayu Jati Rakyat dan Jati Perhutani. [Skripsi]. IPB. Bogor. Indonesia.

Fahmi, A.M., Anwar, U.M.K., & Rafidah, M.S. (2018). Wood Finishing: Finishes and Techniques. Timber Technology Bulletin.

Flexner, B. (1999). Understanding Wood Finishing: How to Select and Apply the Right Finish. The Reader’s Digest Association. New York.

Darmawan, W., Nandika, D., Noviyanti, E., Alipraja, I., Lumongga, D., Gardner, D., & Gérardin, P. 2018. Wettability and Bonding Quality of Exterior Coatings on Jabon and Sengon Wood Surfaces. J. Coat. Technol. Res, 15(1): 95-104.

Darmawan, W., Rahayu, I.S., Padlinurjaji, I.M., & Pandit. K.N. (2017). Pengerjaan Kayu Ilmu-ilmu Penunjang dan Teknologi Proses. IPB Press. Bogor.

Gavrilovix-Grmusa, I., Dunky, M., Miljkovic, J., Djiporovic-Momcilovic, M. (2012). Influence of The Viscosity of UF Resins on The Radial and Tangential Penetration into Poplar Wood and on The Shear Strenght of Adhesive Joints. Holzforschung, 66(7): 849-856.

Gray, V. (1962). The Wettability of Wood. Forest Product Journal, 12(9): 452-461.

Halliday, D., Resnick, R., & Walker, J. (2008). Fundamentals of Physics 8th Edition. USA John Wiley & Sons. New York.

Lestari, A.T., Darmawan, I.W., & Nandika, D. (2016). Pengaruh Kondisi Permukaan Terhadap Daya Lekat Lapisan Pelindung. Jurnal Ilmu Teknologi Kayu Tropis, 14(1): 11-22.

Lestari, A.T. (2020). Sifat Keterbasahan pada Bidang Tangensial dan Radial Kayu Rajumas (Duabanga moluccana Blume). Jurnal Perennial, 16(1): 7-10.

Marbun, S.D., Wahyudi, I., Suryana, J., & Nawawi, D.S. (2019). Anatomical Structures and Fiber Quality of Four Lesser-Used Wood Species Grown in Indonesia. J. Korean Wood Science Technology, 47(5) : 617-632.

Monni, J., Alvila, L., & Pakkanen, T.T. (2007). Structural and Physical Changes in Phenol-formaldehyde Resol Resin as A Function of The Degree of Condensation of Resol Solution. Industrial Engineering Chemistry Research, 46(21): 6916-6924.

Muslich, M., & Rulliaty, S. (2016). Ketahanan 45 Jenis Kayu Indonesia Terhadap Rapay Kayu Kering dan Rayap Tanah. Jurnal Penelitian Hasil Hutan, 34(1): 51-59.

Panshin, A.J., & de Zeeuw, C. (1970). Textbook of Wood Technology: Structure, Identification, Uses, and Properties of The Commercial Woods of The United States and Canada. McGraw-Hill Book Company. New York.

Qin, Z., Zhang, Q., Gao, Q., Zhang, S., & Li., J. (2014). Wettability of Sanded and Aged Fast-Growing Poplar Wood Surfaces: II. Dynamic Wetting Models. BioResources, 9(4): 7176-7188.

Rofaida, A., Sugiartha, W., Pathurahman., & Anshari, B. (2014). Tinjauan Kuat Acuan Kayu Lokal Berdasarkan Atas Pemilahan Secara Mekanik. Spektrum Sipil, 1(2): 112-120.

Safitri, I.K. (2016). Pengaruh Viskositas Cat Terhadap Keterbasahan dan Daya Lekat Bahan Finishing pada Kayu Jati Rakyat dan Jati Perhutani. [Skripsi]. IPB. Bogor. Indonesia.

Shi, S.Q., & Gardner, D.J. (2001). Dynamic Adhesive Wettability of Wood. Wood and Fiber Science, 33(1): 56-68.

Susila, I.W.W. (2009). Riap Tegakan Duabanga (Duabanga moluccana Bl.) di Rarung. Jurnal Penelitian Hutan dan Konservasi Alam, 7(1):47-58.

Tsoumis, G. (1991). Science and Technology of Wood. Van Nostrand Reinhold. New York.

Unsal, O., Candan, Z., & Korkut, S. (2011). Wettability and Roughness Characteristics of Modified Wood Boards Using A Hot-Press. Industrial Crops and Products, 34: 1455-1457.

Williams, R.S. (2010). Wood Handbook: Wood as an Engineering Material. USDA Forest Service. Wisconsin.

Yuan, Y., & Lee, T.R. (2013). Contact Angle and Wetting Properties. Surface Science Techniques Springer, 51:3 – 34.

Yuningsih, I. (2017). Pengaruh Kekasaran Permukaan dan Kekentalan Bahan Cat Akrilik Terhadap Sifat Keterbasahan pada Kayu Jati Rotasi Panjang dan Pendek. [Skripsi]. IPB. Bogor. Indonesia.

The Effect of Paint Viscosity on The Wettabillity of Rajumas Wood (Duabanga moluccana Blume)