Egg Chip Quality with Different Types and Levels of Fillers
DOI:
https://doi.org/10.20956/hajas.viNo%201.10235Keywords:
infertile eggs, hatching, fillers, eggs chipAbstract
Infertile egg generally only be industrial waste hatching so that the necessary efforts to improve its quality. This can be done by processing. One of them is a chips product, the product resembles a thin plat, small and solid. This studies aim to determine the physicochemical quality of egg chips. The study used a completely randomized design factorial pattern 3x3. Factor A was the type of filler including soy powder, tapioca powder, and a combination of both. Factor B is filler level (%) 0, 3 and 6. The parameters are testing of hardness, friability, solubility and moisture content. The results showed that the types of filler had a very significant effect (P <0.01) on dissolution time. Addition of filler level significantly affected (P <0.05) on hardness, friability and solubility. There is an interaction between types and levels of filler material against hardness and solubility. The addition of tapioca powder at the level of 3% in making egg chips can be increasing hardness, not fragile, solubility time of fast. But the egg chip does not experience changes in water content.Downloads
References
Ansel, H.C. 1989. Introduction to Pharmaceutical Dosage Forms. Lea and Febiger, Georgia.
AOAC. 2003. Official Methods of Analysis. 17th Ed (2 revision) AOAC Internasional. Gaitherburg, MD. USA.
Caccavo, D., Lamberti, G., Barba, A. A., Abrahmsén-Alami, S., Viridén, A. dan Larsson, A. 2017, Effects of HPMC substituent pattern on water up-take, polymer and drug release: An experimental and modelling study. International Journal of Pharmaceutics. 528 (1): 705–713.
Hasyim, N., Mirawati dan S. Sulistiana. 2012. Pengembangan Formulasi Tablet Matriks Gastroretentive Floating dari Amoksilin Trihidrat. Laporan Penelitian. Universitas Hasanuddin. Makassar. 16 (3) : 131-138
Krok, A., Vitorino, N., Zhang, J., Frade, J. R. dan Wu, C. Y. 2017. Thermal properties of compacted pharmaceutical excipients. International Journal of Pharmaceutics. 534 (1-2): 119-127
Larsson, M., Johnsson, A., Gardebjer, S., Bordes, R. dan Larsson, A. 2017. Swelling and mass transport properties of nanocellulose-HPMC composite films, Materials and Design, 122 :414–421.
Lawal, M. V., Odeniyi, M. A. dan Itiola, O. A. 2015. Effect of thermal and chemical modifications on the mechanical and release properties of paracetamol tablet formulations containing corn, cassava and sweet potato starches as filler-binders. Asian Pacific Journal of Tropical Biomedicine. 5 (7) : 585–590.
Lestari, 2012. Mengenal lebih dekat alat pengering Freeze Dryer. http://tsffarmasiunsoed2012.wordpress.com/2012/06/15/mengenal-lebih-dekat-alat-pengering-freeze-dryer/. Diakses pada tanggal 12 Februari 2016.
Nahariah, E. Abustam, dan R. Malaka. 2010. Karakteristik fisikokimia tepung putih telur hasil fermentasi Saccharomyces cereviceae dan penambahan sukrosa pada putih telur segar. JITP.1 (1):37-38
Nnamani, N. D. dan Okonkwo, T. J. N. 2017. Optimization of metronidazole tablet formulation using Manihot utilissima starch and a combination of processing techniques. Future Journal of Pharmaceutical Sciences. 3: 65–70.
Nugrahani, Ilma, H. Rahmat dan J. Djajadisastra. 2005. Karakteristik granul dan tablet propranolo hidroklorida dengan metode granulasi peleburan. Jakarta: Juruan Farmasi. Majalah Farmasi Indonesia, 16 (3): 167-172.
Nuryati, T., M. Khamim, P. Hardjosworo, dan Sutarto. 2002. Sukses Menetaskan Telur. Penebar Swadaya. Jakarta.
Parrot, E. 1971. Pharmaceutical Technology Fundamental Pharmaceutics. Burgess Publishing Company. United States of America.
Poedjiadi, A. 1994. Dasar-Dasar Biokimia. Penerbit UI Press: Jakarta
Rhoihana, D. 2008. Perbandingan Availibilitas In Vitro Tablet Metronidazol Produk Generik dan Produk Dagang. Universitas Muhammadiyah Surakarta, Surakarta.
Setyaningsih, D. 2010. Analisis Sensori untuk Industri Pangan dan Agro. Institut Pertanian Bogor Press. Bogor
