The Effect of the Rock Slope Material on the Compressive Strength Value in Malino, South Sulawesi Province
Pengaruh Material Penyusun Lereng Batuan terhadap Nilai Kuat Tekan di Daerah Malino Provinsi Sulawesi Selatan
DOI:
https://doi.org/10.20956/geocelebes.v6i1.19309Keywords:
andesite igneous rock, uniaxial compressive strength, XRD, XRFAbstract
The research location is on the upstream slope of the Jeneberang River in Malino, Gowa Regency, South Sulawesi. This study aims to determine the types of rocks the slopes and to study the relationship between mineralogy characteristics and rock mechanical properties. Mineralogical characteristics analysis used petrographic analysis, XRD and XRF, while for the analysis of rock mechanical properties using uniaxial compressive strength analysis in this study used three types of samples taken on the same slope with the top, middle and bottom sampling points. The results of this study indicate that the rock types found on the slopes are andesite igneous rock types with the same main mineral types, the mineral is albit, analcime, quartz and leucite, while the secondary minerals found in each sample are different, on the slopes of sample A the secondary mineral is spodumene, sample B secondary mineral is garnet and sample C is palygorskite. The value of the results of testing the mechanical properties of each sample is also different, the correlation of the three uniaxial compressive strength test values to the mineral composition of rock samples shows that the correlation of quartz minerals to the compressive strength value and young's modulus has a fairly high correlation value of 0,934 and 0,9798, the mineral correlation value to the poisson ratio indicates that the mineral leucite has high correlation value compared to other minerals.Downloads
References
Afasedanja, M.T. 2020. Hubungan Morfologi dengan Mekanika Properties terhadap Kestabilan Lereng pada Daerah Aliran Sungai Jeneberang Propinsi Sulawesi Selatan. Jurnal Teknik AMATA. 1(1), pp.5-10. https://ojs.pat.ac.id/index.php/Amata_amamapare/article/view/20
Arif, I. 2016. Geoteknik Tambang. Jakarta: Gramedia Pustaka Utama.
Bieniawski, Z.T. and Bernede, M.J. 1979. Suggested methods for determining the uniaxial compressive strength and deformability of rock materials: Part 1. Suggested method for determining deformability of rock materials in uniaxial compression. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts. 16(2), pp.138–140. https://doi.org/10.1016/0148-9062(79)91451-7
Giannakopoulou, P.P., Petrounias, P., Tsikouras, B., Kalaitzidis, S., Rogkala, A., Hatzipanagiotou, K. and Tombros, S.F. 2018. Using Factor Analysis to Determine the Interrelationships between the Engineering Properties of Aggregates from Igneous Rocks in Greece. Minerals. 8(12), pp.580(1-23). https://doi.org/10.3390/min8120580
Hardiyono, A. 2013. Karakteristik Batuan Beku Andesit & Breksi Vulkanik, Dan Kemungkinan Penggunaan Sebagai Bahan Bangunan Daerah Ukir Sari, Kecamatan Bojonegara Kabupaten Serang, Provinsi Banten. Bulletin of Scientific Contribution. 11(2), pp.89-95 https://jurnal.unpad.ac.id/bsc/article/view/8290
Irfan, T.Y. 1996. Mineralogy, fabric properties and classification of weathered granites in Hong Kong. Quarterly Journal of Engineering Geology and Hydrogeology. 29(1), pp.5–35. https://doi.org/10.1144/GSL.QJEGH.1996.029.P1.02
Isra N., Lias S.A. and Ahmad, A. 2019. Karakteristik Ukuran Butir dan Mineral Liat Tanah pada Kejadian Longsor (Studi Kasus: Sub Das Jeneberang). Jurnal Ecosolum, 8(2), pp.62-73. https://doi.org/10.20956/ecosolum.v8i2.7874
Keikha T. and Keykha H. 2013. Correlation between Mineralogical Characteristics and Engineering Properties of Granitic Rocks. Electronic Journal of Geotechnical Engineering. 18, pp.4055-4065. https://www.researchgate.net/publication/287291816_Correlation_between_mineralogical_characteristics_and_engineering_properties_of_granitic_rocks
Tim Forum DAS Sulawesi Selatan. 2004. Pokok-pokok Pikiran Pengelolaan DAS Jeneberang dan Penanganan Bencana Longsor Bawakaraeng. Makassar.
Travis B.R. 1955. Classification of Rocks. Colorado School Of Mines. United State of America
Tuğrul, A. and Zarif, I.H. 1999. Correlation of mineralogical and textural characteristics with engineering properties of selected granitic rocks from Turkey. Engineering Geology. 51(4), pp.303-317. https://doi.org/10.1016/S0013-7952(98)00071-4
Sukamto R. 1982. Geologi Lembar Ujungpandang, Benteng dan Sinjai Sulawesi. Bandung: Pusat Penelitian dan Pengembangan Geologi, Direktorat Jendral Pertambangan Umum dan Energi.
Yusofa, N.Q.A.M. and Zabidia H. 2016. Correlation of Mineralogical and Textural Characteristics with Engineering Properties of Granitic Rock from Hulu Langat, Selangor. Procedia Chemistry. 19, pp.975-980. https://doi.org/10.1016/j.proche.2016.03.144
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
